T.P. Mills SGSS Trad II “J.S. Design” Handmade Putter

T.P. Mills SGSS Trad II “J.S. Design” Handmade Putter

$2,400.00
Skip to product information
T.P. Mills SGSS Trad II “J.S. Design” Handmade Putter
  • T.P. Mills SGSS Trad II “J.S. Design” Handmade Putter
  • T.P. Mills SGSS Trad II J.S. Design handmade putter in Dark Flamed finish, heel-side cavity view
  • Cavity of the T.P. Mills SGSS Trad II showing Mills, anvil, 357G and HAND MADE stamps
  • Deep-milled face of the T.P. Mills SGSS Trad II handmade putter with red and white Mills stamping
  • Low front view of the SGSS Trad II showing J.S. DESIGN by David and GERMAN SS hand stamping
  • Address view of the T.P. Mills SGSS Trad II blade with plumber neck and single white sightline
  • T.P. Mills SGSS Trad II J.S. Design handmade putter in Dark Flamed finish, toe-side cavity view
  • Toe-side three-quarter view of the SGSS Trad II Dark Flamed face and lower sole stamping
  • Heel-side three-quarter view of the SGSS Trad II Dark Flamed face and lower sole stamping
T.P. Mills SGSS Trad II “J.S. Design” Handmade Putter
T.P. Mills SGSS Trad II “J.S. Design” Handmade Putter
$2,400.00

One putter head is available. Length is selected for final assembly before shipment.

HANDCRAFTED BY DAVID MILLS
SWISS GERMAN STAINLESS STEEL — SGSS
TRAD II CLASSIC CAVITY-BACK BLADE
357G INDIVIDUAL HEAD WEIGHT
DARK FLAMED FINISH
PLUMBER NECK · TOE-HANG BALANCE
DEEP-MILLED FACE
SINGLE WHITE SIGHTLINE

An individually crafted T.P. Mills SGSS Trad II distinguished by J.S. Design hand stamping, a Dark Flamed finish and the restrained proportions of a classic plumber-neck blade.

The putter shown in the photographs is the actual piece offered for sale. One individually finished head is available, and the final playing length is selected before assembly and shipment.

The putter shown in the photographs is the actual piece offered
for sale.

T.P. Mills Handmade

Each T.P. Mills Handmade putter reflects the shaping, finishing and design decisions of David Mills. Created in very limited numbers, every piece combines the character of handwork with the performance expected from a putter built to be played.

The Piece

This Trad II begins with a classic SGSS cavity-back blade and is completed with an individual J.S. Design stamping composition.

The cavity features the flowing Mills script, a black anvil mark and the hand-stamped 357G head weight. The rear bumpers carry HAND and MADE lettering in white paint fill, while the lower face and sole edge display J.S. DESIGN by David and GERMAN SS markings.

A playful character motif appears on the neck, and the face heel is finished with red, white and black T.P. Mills graphics. Differences in the depth, position and spacing of the individual marks are part of the handmade composition rather than the appearance of a uniform production process.

Crafted by David Mills

Each T.P. Mills Handmade putter reflects the shaping, finishing and design decisions of David Mills.

Rather than being completed as a uniform production item, every handmade piece carries its own arrangement of stamping, paint fill, surface tone and finishing detail. The result is a putter built to be played while retaining the individual character expected from a handmade T.P. Mills creation.
Address view of the T.P. Mills SGSS Trad II blade with plumber neck and single white sightline

The Model Profile

The Trad II presents a traditional cavity-back blade profile with a clean topline, compact heel-to-toe proportions, softened rear bumpers and a full flange behind the face.

A single white sightline is positioned at the center of the rear flange. It provides one clear visual reference without introducing the multiple lines or extended alignment structures commonly found on larger mallet putters.

The result is a familiar, uncluttered address view for golfers who prefer the visual proportions of a classic blade.

Handmade Details
Material and Feel

The head is produced from Swiss German Stainless Steel, commonly identified as SGSS within the T.P. Mills Handmade line.

The Trad II uses a classic plumber neck and toe-hang balance.

This configuration creates a familiar offset presentation and allows natural opening and closing of the putter face through the stroke. It may suit golfers who prefer a slight-arc motion rather than a face-balanced or Zero Torque configuration.

Stroke recommendations are a starting point rather than an absolute fitting rule. Aim, setup, eye position, tempo, delivery and personal visual preference should also be considered when selecting a putter.
Finish

The Dark Flamed finish gives the surface a restrained charcoal foundation with shifting bronze, violet, blue and silver tones. These transitions become more or less visible as the lighting and viewing angle change.

The finish is intentionally individual. The photographs document the actual tone, handwork and surface character of the piece offered for sale, although its appearance may vary slightly between displays and lighting environments.
Hand Stamping
Face Milling

A concentric circular deep-milled pattern extends across the face.

The combination of the SGSS head, 357-gram mass and face geometry contributes to the sound and feedback produced at impact. Final impact character will also vary with the golf ball, shaft, grip, stroke speed and strike location.

No single material or milling pattern determines feel on its own; the finished putter should be evaluated as a complete system.
Specifications

Model: Trad II “J.S. Design”

Product Line: T.P. Mills Handmade

Craftsman: David Mills

Head Style: Classic Cavity-Back Blade

Material: Swiss German Stainless Steel — SGSS

Finish: Dark Flamed Finish

Head Weight: 357g, hand-stamped on the actual head

Neck: Plumber Neck

Balance: Toe Hang

Recommended Stroke: Slight Arc

Loft: 3°

Lie: 71°

Face Milling: Deep Milled, Concentric Circular Pattern

Alignment: Single White Sightline

Paint Fill: White, Red and Black

Hand Stamping: Mills script, anvil, 357G, HAND MADE, J.S. DESIGN by David, GERMAN SS and character motifs

Final Assembly Length: Customer-selected before shipment

Country of Origin: Made in USA

Actual Product: The piece shown in the photographs
Certificate and Included Items

Included with this putter:

• T.P. Mills SGSS Trad II "J.S. Design" Handmade Putter
• T.P. Mills Headcover
• Certificate of Authenticity
• Protective Packaging
• Standard Shaft and Grip Configuration

The putter shown in the product photographs is the actual piece
offered for sale.
Handmade Characteristics

Minor differences in hand-stamping, surface texture, color fill and finish are natural characteristics of an individually finished putter. These variations contribute to the identity of the piece and are not considered manufacturing defects.
Final Assembly and Length

This putter will be assembled to the length selected above before shipment. Please review your selection carefully. For a length not listed, choose Custom Length Request and enter the exact finished length required.
Care and Finish

After play, wipe the putter head clean and dry, replace the headcover and avoid prolonged exposure to moisture, chemicals or abrasive surfaces. Dark and specialty finishes may show normal wear over time.
Warranty and Returns

Warranty and return eligibility are governed by the current policies published on this website. Please contact us before purchase if you have questions about final assembly, finish care or international delivery.
Shipping, Warranty and Care

One putter head is available. Your selected length will be applied during final assembly.