T.P. Mills Tour Issue 77 ZT Putter

T.P. Mills Tour Issue 77 ZT Putter

33inch
₩700,000
Skip to product information
T.P. Mills Tour Issue 77 ZT Putter
  • T.P. Mills Tour Issue 77 ZT Putter
  • T.P. Mills Tour Issue 77 ZT Zero Torque putter three-quarter view
  • T.P. Mills Tour Issue 77 ZT cavity view
  • T.P. Mills Tour Issue 77 ZT deep-milled face view
  • T.P. Mills Tour Issue 77 ZT open-center mallet address view
  • T.P. Mills Tour Issue 77 ZT central shaft connection detail
  • T.P. Mills Tour Issue 77 ZT sole view
  • T.P. Mills Tour Issue 77 ZT central shaft connection detail
  • T.P. Mills Tour Issue 77 ZT sole view
  • T.P. Mills Tour Issue 77 Zero Torque Jumbo Grip
  • T.P. Mills Tour Issue 77 ZT head cover
T.P. Mills Tour Issue 77 ZT Putter
T.P. Mills Tour Issue 77 ZT Putter

A 360-gram open-center Zero Torque mallet combining forged 303 stainless steel, 6061 aluminum, three-line alignment and a deep-milled face.
₩700,000
Length

ZERO TORQUE CONFIGURATION
FORGED 303 STAINLESS STEEL
LARGE OPEN-CENTER MALLET
THREE-LINE ALIGNMENT
PLATINUM FINISH
DEEP-MILLED FACE

The Vista ZT combines a large, open-center mallet profile with a
Zero Torque configuration designed to reduce rotational tendency
around the shaft axis.

Its forged stainless steel construction, three-line alignment
system, deep-milled face and silver finish create a clean,
purposeful setup from address.

Individual performance and fit will continue to depend on setup,
aim, stroke path and impact location.

T.P. Mills Club Champ Zero Torque

T.P. Mills Club Champ Zero Torque putters combine distinct head profiles and alignment views with a configuration designed to minimize the head’s tendency to rotate around the shaft axis.

Each model retains its own shape, material, finish and visual setup, allowing golfers to compare the Zero Torque design that best matches their address preference and stroke requirements.
T.P. Mills Tour Issue 77 ZT open-center mallet address view

The Profile

The Tour Issue 77 ZT presents an open-center, winged mallet profile
with separated rear wings and a broad overall footprint.

Its U-shaped center opening keeps the head visually open while
providing the substantial presence expected from a modern mallet.
The result is a distinctive address profile for golfers who prefer
clearly visible head geometry behind the ball.

Within the Tour Issue Zero Torque family, the 77 ZT offers the most
open and architectural visual presentation.
T.P. Mills Tour Issue 77 ZT sole view

Zero Torque Design

Made with care and unconditionally loved by our customers, this signature bestseller exceeds all expectations.
T.P. Mills Tour Issue 77 ZT central shaft connection detail

Shaft Axis and Head Balance

Made with care and unconditionally loved by our customers, this signature bestseller exceeds all expectations.
T.P. Mills Tour Issue 77 ZT Zero Torque putter three-quarter view

Designed for Play

The Tour Issue 77 ZT may suit golfers who prefer an open-center
winged mallet, a clearly defined alignment frame and a Zero Torque
configuration designed to reduce active face rotation.

Final fit should still be confirmed through personal setup, aim
and stroke testing.

Material, Finish and Feel

The Tour Issue 77 ZT combines forged 303 stainless steel and
6061 aluminum in a dual-material head construction.

Platinum and black-anodized finishes create a clear visual contrast
between the materials while emphasizing the open-center geometry.

The final impact character is influenced by the 360-gram head mass,
deep-milled face, shaft, grip, golf ball and strike location.

Frequently asked questions
What Zero Torque Means

A Zero Torque configuration is designed to minimize the turning
force that can cause the putter head to rotate around the shaft axis
during the stroke.

The design does not make every stroke automatic. Aim, setup, path,
impact location, tempo and individual fitting continue to influence
putting performance.
Zero Torque Design

The Tour Issue 77 ZT uses a Zero Torque configuration designed to reduce the head's tendency to rotate around the shaft axis during the stroke.

This design is intended for golfers who prefer less active face manipulation while maintaining the broad alignment view of an open-center mallet.
Shaft Axis and Head Balance

The shaft enters the central area of the 77 ZT head and works with the model's mass distribution to create its Zero Torque balance.

The configuration differs from a conventional heel-shafted or double-bend mallet and is intended to reduce rotational tendency around the shaft axis.
Head shape and Alignment

The Tour Issue 77 ZT uses three alignment references across its
open-center mallet structure.

Two long outer sightlines extend along the rear wings, while a
shorter central reference sits closer to the shaft position.

Together, these elements form a broad alignment frame while
preserving the open visual character of the head.
Address and Face Stability

The open-center geometry and three alignment references create a clearly structured view behind the ball.

Together with the Zero Torque configuration, the 77 ZT is intended for golfers who prioritize a defined alignment frame and reduced face manipulation.
Who It Fits

The Tour Issue 77 ZT may suit golfers who prefer an open-center
winged mallet, a clearly defined alignment frame and a Zero Torque
configuration designed to reduce active face rotation.

Final fit should still be confirmed through personal setup, aim
and stroke testing.
Material and Finish

The Tour Issue 77 ZT combines forged 303 stainless steel and
6061 aluminum in a dual-material head construction.

Platinum and black-anodized finishes create a clear visual contrast
between the materials while emphasizing the open-center geometry.

The final impact character is influenced by the 360-gram head mass,
deep-milled face, shaft, grip, golf ball and strike location.
Face Milling and Feel

The Tour Issue 77 ZT uses a deep-milled face to create a clearly
defined impact response.

The milling geometry works with the 360-gram dual-material head
to influence sound, feedback and the sensation of contact.

Final impact character will also vary with the golf ball, shaft,
grip, stroke speed and strike location.
Standard vs Zero Torque

Choose the 77 ZT if you prefer an open, winged alignment frame and
a clearly visible center section behind the ball.
Specifications

Model: Tour Issue 77 ZT
Product Line: Tour Issue
Head Style: Open-Center / Winged Mallet
Structure: Zero Torque
Balance: Zero Torque
Shaft Configuration: Zero Torque
Material: Forged 303 Stainless Steel + 6061 Aluminum
Finish: Platinum + Black Anodized
Head Weight: 360 g
Loft: 3°
Lie: 71°
Face Milling: Deep Milled
Alignment: Three-Line Alignment
Recommended Stroke Preference: Reduced Face Rotation
Hand: Right-Handed
Length Options: 32", 33", 34", 35"
Country of Origin: Made in China
Headcover: Included
Included items

Included with this putter:

• T.P. Mills Tour Issue 77 ZT Putter
• T.P. Mills Headcover
• Standard Shaft and Grip Configuration
Care and Warranty

After play, wipe the putter head clean and dry and replace the
headcover. Avoid prolonged exposure to moisture, chemicals or
abrasive surfaces.

Normal play may gradually produce light marks or surface wear on
areas contacting the ball, ground or headcover.

Warranty and return eligibility are governed by the current policies
published on this website.

Take a look behind the scenes of our latest product launch.

 Discover the collection

Recommended Products