T.P. Mills Solana ZT Zero Torque Mallet Putter

SOLANA Zero Torque

Black / 33inch

₩800,000

SOLANA Zero Torque

A dual-material Zero Torque mallet combining a six-color anodized aluminum body with a forged 303 stainless steel sole plate finished in T.P. Mills Platinum Finish.

₩800,000

색상Black

Length 33inch 34inch 35inch

DUAL-MATERIAL ZERO TORQUE CONSTRUCTION
ANODIZED ALUMINUM BODY
SIX COLOR OPTIONS
FORGED 303 STAINLESS STEEL SOLE PLATE PLATINUM FINISH

The SOLANA ZT combines a lightweight anodized aluminum body with a forged 303 stainless steel sole plate finished in T.P. Mills Platinum Finish.

The aluminum body is offered in six distinct colors—Black, Red, Orange, Green, Blue and Pink—while the silver sole plate provides a consistent metallic contrast across every option.

This dual-material construction is integrated with the SOLANA ZT head shape and Zero Torque configuration to create a distinctive
visual and structural identity.

SIX COLORS. ONE SOLANA ZT.

Choose from six anodized aluminum body colors while retaining the same SOLANA ZT head design and Zero Torque configuration.

Every color option is paired with a forged 303 stainless steel sole plate completed in T.P. Mills Platinum Finish.

BLACK

T.P. Mills Solana ZT Zero Torque mallet putter with open-center head

RED

ORANGE

GREEN

BLUE

PINK

Colors may appear slightly different depending on lighting, viewing angle and display settings.

Dual-Material Construction

The SOLANA ZT is constructed from two visually and structurally
distinct components.

The colored body is made from aluminum and completed with an
anodized finish. Six color options provide different visual
presentations while retaining the same SOLANA ZT head design.

The silver sole plate is produced from forged 303 stainless steel
and completed in T.P. Mills Platinum Finish. The contrast between
the anodized aluminum body and stainless steel sole plate defines
the SOLANA ZT’s distinctive dual-material identity.

T.P. Mills Club Champ Zero Torque

T.P. Mills Club Champ Zero Torque putters combine distinct head profiles and alignment views with a configuration designed to minimize the head’s tendency to rotate around the shaft axis.

Each model retains its own shape, material, finish and visual setup, allowing golfers to compare the Zero Torque design that best matches their address preference and stroke requirements.

T.P. Mills Solana ZT 303 stainless steel sole plate in Platinum finish

The Profile

The SOLANA ZT presents a distinctive mallet profile built around a
broad aluminum body and a contrasting stainless steel sole plate.

Its sculpted outer shape creates a substantial view behind the ball,
while the central shaft position and clearly defined alignment
features give the head a purposeful Zero Torque appearance.

The combination of colored aluminum and silver stainless steel makes
the SOLANA immediately recognizable from both the address and sole
views.

Zero Torque Design

Made with care and unconditionally loved by our customers, this signature bestseller exceeds all expectations.

Shaft Axis and Head Balance

Made with care and unconditionally loved by our customers, this signature bestseller exceeds all expectations.

Designed for Play

The SOLANA ZT may suit golfers who prefer:

• A clearly defined mallet-style address view
• A Zero Torque configuration designed to reduce face rotation
• A substantial head presence behind the ball
• A dual-material construction with contrasting finishes
• A choice of six individual body colors

Individual fit should still be confirmed through personal setup,
aim and stroke testing.

Material, Finish and Feel

The SOLANA ZT combines an anodized aluminum body with a forged
303 stainless steel sole plate.

The aluminum body is offered in Black, Red, Orange, Green, Blue
and Pink. Each body is completed with an anodized finish, while
the stainless steel sole plate receives T.P. Mills Platinum Finish.

The resulting contrast highlights the separation between the colored
upper body and silver sole structure.

Impact character is influenced by the combined construction, head
geometry, face surface, shaft, grip, golf ball and strike location.

Frequently asked questions

A Zero Torque configuration is designed to reduce the turning force that can cause the putter head to rotate around the shaft axis during the stroke.
It does not guarantee that the face will remain square or that every putt will start on line. Aim, setup, path, speed, impact location and individual fitting continue to influence performance.

The SOLANA ZT aluminum body is available in six anodized colors:

• Black
• Red
• Orange
• Green
• Blue
• Pink

Every color option shares the same listed SOLANA ZT head design and
Zero Torque configuration.

Colors may appear slightly different depending on lighting, viewing
angle and display settings.

The colored body is made from aluminum and completed with an
anodized finish.

The silver sole plate is made from forged 303 stainless steel and
completed in T.P. Mills Platinum Finish.

Platinum Finish refers to the surface finish applied to the stainless
steel component. The sole plate is not made from platinum.

The SOLANA ZT uses a Zero Torque configuration designed to reduce
the turning tendency of the putter head around the shaft axis during
the stroke.

This configuration is intended for golfers who prefer less active
opening and closing of the face and a more stable head orientation
through the motion.

Zero Torque does not make every stroke automatic. Aim, setup, path,
impact location, tempo and individual fitting continue to influence
putting performance.

The shaft connects through the central area of the SOLANA ZT head
and works with its dual-material construction and mass distribution
to create the model’s Zero Torque balance.

This arrangement differs from a conventional heel-shafted or
double-bend configuration and is designed to reduce rotational
tendency around the shaft axis.

The result retains the SOLANA’s distinctive mallet profile while
creating a clearly different balance and address presentation.

The SOLANA ZT uses a substantial mallet profile with clearly defined
visual references behind the ball.

The contrasting anodized body and silver sole structure give the head
a distinctive outline from address, while its alignment features
provide a clear reference for face and target-line orientation.

The SOLANA ZT may suit golfers who prefer:

• A clearly defined mallet-style address view
• A Zero Torque configuration designed to reduce face rotation
• A substantial head presence behind the ball
• A dual-material construction with contrasting finishes
• A choice of six individual body colors

Individual fit should still be confirmed through personal setup,
aim and stroke testing.

The SOLANA ZT combines an anodized aluminum body with a forged
303 stainless steel sole plate.

The aluminum body is offered in Black, Red, Orange, Green, Blue
and Pink. Each body is completed with an anodized finish, while
the stainless steel sole plate receives T.P. Mills Platinum Finish.

The resulting contrast highlights the separation between the colored
upper body and silver sole structure.

Impact character is influenced by the combined construction, head
geometry, face surface, shaft, grip, golf ball and strike location.

The SOLANA ZT’s impact character is influenced by its dual-material
construction, head geometry, face surface and overall mass
distribution.

The final sound and feel will also vary with the golf ball, shaft,
grip, stroke speed and strike location.

Model: SOLANA ZT
Product Line: Club Champ
Head Style: Zero Torque Mallet
Structure: Dual-Material Construction
Balance: Zero Torque
Body Material: Aluminum
Body Finish: Anodized Finish
Body Color Options: Black, Red, Orange, Green, Blue and Pink
Sole Plate Material: Forged 303 Stainless Steel
Sole Plate Finish: T.P. Mills Platinum Finish
Hand: Right-Handed
Length Options: 33", 34" and 35"
Country of Origin: Made in Korea
Headcover: Included

Included with this putter:

• T.P. Mills Club Champ SOLANA ZT Putter
• T.P. Mills Headcover
• Standard Shaft and Grip Configuration

After play, wipe the putter head clean and dry and replace the
headcover. Avoid prolonged exposure to moisture, chemicals or
abrasive surfaces.

Anodized aluminum and other finished surfaces may gradually show
light marks or normal wear in areas that contact the ball, ground
or headcover.

Warranty and return eligibility are governed by the current policies
published on this website.